Modular Type Electro-hydraulic Proportional Flow Control Valves EMOF-02, EMF-02
- Home
- Products
- Traditional Valves
- Modular Type
- Modular Type Others
- Modular Type Electro-hydraulic Proportional Flow Control Valves
Features
- Air Bleeding:
To enable proper pressure control, loosen the air vent starting up the pomp in order to bleed any air from the pump, and fill the inside of the solenoid with hydraulic operating fluid. - Manual Pressure Adjusting Screw:
For the initial adjustment or when there is no input current to the valve due to an electrical problem or some other reason, value pressure can be increased by rotating the manual adjustment screw clockwise (rightward). Normally, the manual adjusting screw should be rotated back fully to the left (counterclockwise) and secured wish the lock nut. - T Port Backl Pressure:
Since this value has an internal drain system, make sure that valve T port back pressure is no greater than 25.5 bar.
- Specifications
- How to Order
| Model Number | Maximum Pressure | T Part Allowable back Pressue | Flow Pate Control Range | Rated Current | Coil Resistance | Hysteresis | Voltage |
|---|---|---|---|---|---|---|---|
| EMOF-02 | 210 (3046 psi) | 25 (362 psi) max. | 0.3~25 (0.08~6.60 gpm) | 850±10% | 20 (20℃) | 3 max. | 24 |
| EMF-02 | |||||||
| Fluid Type | ISO VG 32, 46, 68 | ||||||
| Viscosity | 10~400 (59~1854 SSU) | ||||||
| Operating Temperature | -15~70 (-5~158oF) | ||||||
| Contamination Level | ISO4406. 21/19/16 NAS1638,10 | ||||||
- All screws with metric measure , if require inch measure , please contact us.
