Proportional Electronic Controller AMP-V02B
- Home
- Application
- Metalworking Machinery
- Proportional Electronic Controller
Features
- Power amplifiers for proportional valves.
- For connection between the amp/controller and solenoid coil, use a 2-conductor shielded wire with a conductor nominal cross-section area of 2.0mm²
- Type VCTF (Rated Voltage: 300V vinyl cab tire cord. Wiring between the command voltage generator and amplifier should be VCTF 0.75mm²
- 3-conductor wire. Class 3 grounding. If the ground line is unstable, do not connect the shield to anything.
- Specifications
- How to Order
Voltage type | DC Input | Dither frequency (DITHER) | 50~300 | ||
---|---|---|---|---|---|
DC Power Input | 24 | Input control volt. | (mA) | 4~20 | |
Maximum power | 30 | (VDC) | 0~10 | ||
Valve coil restance | 10 | Fuse | 2 | ||
Operation temperature | 0~65 (32~149oF) | ||||
Maximum output current | 1 | Temperature drift (max.) | 0.3mA/'C | ||
1.8 | Storage temperature | -10~75 (14~167°F) |
![](/upload-files/product/1-Traditional-Valves/2-Non-Modular-type/04-Proportional/AMP-V02B/AMP-V02B-03.jpg)